USB-SD-DMX512
售前咨詢
152 1888 0905
Products List
Contact us
Tel: 020-3100 7330 / 152 1888 0905/189 0229 5001
E-mail: Lidfq512@163.com
Address:No. 7, Lane 3, Dashun Street, Qianfeng North Road, Shiji Town, Panyu District, Guangzhou, Guangdong, China
Professional 2-way DMX512 relay
Description：
Functional features:
1, Support international standard DMX512 signal, control 2 relay switch, occupy 2 DMX512 channels.
2,1 DMX signal/power status indicator (DMX signal flashes, no DMX signal is always on);
2 relay switch indicator light, easy to identify.
3. Support setting anti-interference delay (0-5 seconds) trigger switch, especially suitable for DMX switching power supply.
4, Support two ways to set DMX address:
(1) The value of channel 1~6 of DMX console or controller +1 key to confirm setting and save (simple mode)
(2) Single key setting DMX address (press and hold the button first, and then energize the box, that is, enter the single key setting DMX address mode).
5,1 setting buttons, can be used to set the DMX address and restore factory Settings (in normal working mode, long press for about 6 seconds will restore the setting, the indicator flash 3 times, DMX address =1;Trigger delay time =0 seconds no delay!)
6,1 3P DMX signal terminal.
7, 2-way relay switch load capacity, support 3 versions: 5A 220VAC;/10A 220VAC;16A
220VAC, please refer to the box mark for confirmation!
8, Power interface: DC5.5-2.1;Supports 2 voltage versions 12V or 24V, please see box identification
Recognize good, can not connect the wrong power supply voltage!
9, size: 81*50*31mm.
- Product Details
- Details
Functional features:
1, Support international standard DMX512 signal, control 2 relay switch, occupy 2 DMX512 channels.
2,1 DMX signal/power status indicator (DMX signal flashes, no DMX signal is always on);
2 relay switch indicator light, easy to identify.
3. Support setting anti-interference delay (0-5 seconds) trigger switch, especially suitable for DMX switching power supply.
4, Support two ways to set DMX address:
(1) The value of channel 1~6 of DMX console or controller +1 key to confirm setting and save (simple mode)
(2) Single key setting DMX address (press and hold the button first, and then energize the box, that is, enter the single key setting DMX address mode).
5,1 setting buttons, can be used to set the DMX address and restore factory Settings (in normal working mode, long press for about 6 seconds will restore the setting, the indicator flash 3 times, DMX address =1;Trigger delay time =0 seconds no delay!)
6,1 3P DMX signal terminal.
7, 2-way relay switch load capacity, support 3 versions: 5A 220VAC;/10A 220VAC;16A
220VAC, please refer to the box mark for confirmation!
8, Power interface: DC5.5-2.1;Supports 2 voltage versions 12V or 24V, please see box identification
Recognize good, can not connect the wrong power supply voltage!
9, size: 81*50*31mm.
If the anti-interference delay is set to be greater than 0, the DMX signal control value should remain stable for a certain period of time before triggering the action, otherwise it will be treated as interference and not triggered!
-Related products
Professional 4-way DMX512 with NORMALLY open and normally closed contact relay
Professional 6-way DMX512 relay (with finger pull switch)
